JB/T 10187 — 滚动轴承深沟球轴承振动（速度）技术条件

📋 Scope / 适用范围 ai_extracted

This standard specifies the vibration (velocity) technical conditions for deep groove ball bearings (hereinafter referred to as bearings) with diameter series 0, 2, and 3 conforming to GB/T 276—1994, nominal bore diameters ranging from 3 mm to 120 mm, and radial clearances conforming to groups 0, 2, and 3 of GB/T 4604—2006, as well as the vibration (velocity) peak technical conditions for bearings with bore diameters from 3 mm to 60 mm corresponding to groups V3 and V4. The V group specified in this standard represents the basic requirements for vibration (velocity) of general-purpose bearings, and such bearings are not marked with "V". Groups V1, V2, V3, and V4 are applicable to bearings with specific requirements for vibration (velocity). Groups VF3 and VF4 are applicable to bearings with requirements for both vibration (velocity) and vibration (velocity) peaks. This standard applies to the production inspection of finished bearings by manufacturers and the acceptance inspection by users.

本标准规定了外形尺寸符合GB/T 276—1994 规定的直径系列0、2、3，公称内径为3 mm～120 mm，径向游隙符合GB/T 4604—2006 规定的0、2、3 组游隙的深沟球轴承（以下简称轴承）振动（速度）技术条件以及内径为3 mm～60 mm，V3 和V4 组对应的振动（速度）峰值技术条件。本标准规定的V 组是对通用轴承振动（速度）的基本要求，轴承上不标记“V”；V1、V2、V3、 V4 组适用于对振动（速度）有要求的轴承；VF3、VF4 组适用于对振动（速度）和振动（速度）峰值均有要求的轴承。本标准适用于制造厂对成品轴承的生产检验和用户验收。

📝 Foreword / 前言 ai_extracted

This standard replaces JB/T 10187—2000 "Rolling bearings — Technical specification for vibration (velocity) of deep groove ball bearings". The main changes in this standard compared with JB/T 10187—2000 are as follows: —— The scope of application of the standard is expanded to include deep groove ball bearings with clearance groups 2 and 3 (Chapter 1 of this edition); —— The definitions for group designations VF3 and VF4 are added (Chapter 4 of this edition); —— The vibration (velocity) peak limits VP3 and VP4 corresponding to groups VF3 and VF4 for bore diameters from 3 mm to 60 mm are added (Table 1 of this edition); —— The measurement method for vibration (velocity) of deep groove ball bearings is added (Annex A of this edition); —— The measurement methods for radial runout and axial runout of the mandrel are added (Annex B of this edition); —— The measurement method for the background vibration of the test device is added (Annex C of this edition); —— The "Measurement method for vibration (velocity) of miniature deep groove ball bearings" (Annex A of the 2000 edition) is deleted. Annexes A, B, and C of this standard are normative annexes. This standard is proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Technical Committee for Standardization of Rolling Bearings (SAC/TC98). Drafting organizations of this standard: Hangzhou Bearing Test and Research Center Co., Ltd., C&U Group Co., Ltd., Zhejiang Tianma Bearing Co., Ltd., Qianchao Bearing Co., Ltd. Main drafters of this standard: Chen Fanghua, Wang Lanying, Yan Weizeng, Lai Zhigang, Zhang Tianping, Wang Jinhan, Chen Yun. The previous versions of the standard replaced by this standard are as follows: —— JB/T 10187—2000. National Standard Long-Lasting www.gb99.cn Free Download JB/T 10187—2011

本标准代替JB/T 10187—2000《滚动轴承深沟球轴承振动（速度）技术条件》。本标准与JB/T 10187—2000 相比，主要变化如下： ——标准的适用范围扩大至2 组、3 组游隙的深沟球轴承（本版的第1 章）； ——增加了VF3 和VF4 的组别代号定义（本版的第4 章）； ——增加了内径3 mm～60 mm，VF3 和VF4 组对应的振动（速度）峰值限值VP3 和VP4（本版的表1）； ——增加了深沟球轴承振动（速度）测量方法（本版的附录A）； ——增加了心轴径向圆跳动和轴向圆跳动的测量方法（本版的附录B）； ——增加了测试装置基础振动的测量方法（本版的附录C）； ——删除了“微型深沟球轴承振动（速度）测量方法”（2000 年版的附录A）。本标准的附录A、附录B 和附录C 均为规范性附录。本标准由中国机械工业联合会提出。本标准由全国滚动轴承标准化技术委员会（SAC/TC98）归口。本标准起草单位：杭州轴承试验研究中心有限公司、人本集团有限公司、浙江天马轴承股份有限公司、钱潮轴承有限公司。本标准主要起草人：陈芳华、王兰英、阎卫增、来志刚、张天平、王进汉、陈云。本标准所代替标准的历次版本发布情况为： ——JB/T 10187—2000。国标久久 www.gb99.cn 免费下载 JB/T 10187—2011

📚 References & Relations / 引用与关联

normative_reference GB/T 24610.1-2009

normative_reference GB/T 24610.2-2009

normative_reference GB/T 276-1994

normative_reference GB/T 2828-1993

normative_reference GB/T 2828.1-2003

normative_reference GB/T 3141-1994

normative_reference GB/T 4604-1993

normative_reference GB/T 4604-2006

normative_reference ISO 15242-1

normative_reference ISO 15242-2

normative_reference ISO 2859-1

normative_reference ISO 3448

normative_reference ISO 5753

normative_reference JB/T 2974-2004

normative_reference JB/T 5313-1991

📖 Terms & Definitions / 术语和定义 ai_extracted

滚动轴承振动（速度）峰值 peak value of rolling bearings vibration（velocity） / peak value of rolling bearings vibration (velocity): 在给定时间间隔内，轴承振动（速度）的最大正峰值。; The maximum positive peak of bearing vibration (velocity) within a given time interval.

🔗 Related Standards / 同类标准

GB/Z 32332.2-2015 Rolling bearings—Explanatory notes on ISO 281—Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses GB/Z 32332.1-2015 Rolling bearings—Explanatory notes on ISO 281—Part 1: Basic dynamic load rating and basic rating life GB/Z 36517-2018 Rolling bearings—Methods for calculating the modified reference rating life for universally loaded bearings GB/T 307.1-1994 Rolling bearings--Radial bearings--Tolerances GB/T 2509-1981 Copper alloy integrated shaft sleeves for plain bearings--Types, dimensions and tolerances GB/T 2510-1981 Copper alloy integrated shaft sleeves for plain bearings with gears--Types, dimensions and tolerances GB/T 2685-1981 Powder metallurgy plain bearing--Cylindrical type--Types，dimensions and tolerances GB/T 2687-1981 Powder metallurgy plain bearing--Spherical type--Types， dimensions and tolerances