JB/T 11095

离心萃取机 技术条件

离心萃取机 技术条件

Standard Type
JBT
ICS
73.120
CCS
J77
Status
N/A
Issue Date
2011-05-18
Implementation
N/A
Responsible Dept
中华人民共和国工业和信息化部
Drafting Unit
N/A

📋 Scope / 适用范围 ai_extracted

本标准规定了离心萃取机的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于互不相溶的液/液两相的萃取和分离的离心萃取机(以下简称“萃取机”)。

📝 Foreword / 前言 ai_extracted

本标准的附录A 是规范性附录。 本标准由中国机械工业联合会提出。 本标准由全国分离机械标准化技术委员会(SAC/TC92)归口。 本标准负责起草单位:合肥天工科技开发有限公司、合肥通用机械研究院。 本标准主要起草人:张德友、陈崔龙、陈道林、陈建国、周进。 本标准为首次发布。 JB/T 11095—2011

📚 References & Relations / 引用与关联

normative_reference GB 19815
normative_reference GB/T 10894
normative_reference GB/T 10895
normative_reference GB/T 10901
normative_reference GB/T 11352
normative_reference GB/T 11532-2009
normative_reference GB/T 13306
normative_reference GB/T 13384
normative_reference GB/T 14408
normative_reference GB/T 191
normative_reference GB/T 191-2008
normative_reference GB/T 2100
normative_reference GB/T 2100-2002
normative_reference GB/T 4774
normative_reference GB/T 6388
normative_reference ISO 11972
normative_reference ISO 3755
normative_reference ISO 4990
normative_reference ISO 780
normative_reference JB 4744
normative_reference JB/T 4385.1
normative_reference JB/T 7217
normative_reference JB/T 7243
normative_reference JB/T 9095

📖 Terms & Definitions / 术语和定义 ai_extracted

离心萃取机 centrifugal extractor
在离心力场中,利用液/液两相密度的不同,在同一机器中完成混合传质过程和分离过程,达到液/ 液两相萃取分离的连续萃取设备。
最大通量 maximum throughput
单位时间内,萃取机在额定转速下,其转鼓允许通过的最大水量或物料液/液两相混合最大通量。
临界值 critical value
JB/T 11095—2011 2 当通入单一相液体时,轻相刚开始出现溢流时的流量作为临界值。

Content extracted by AI. Not officially verified.