GB/T 3301-1999
AbolishedStandard method for measurement of volume，rim diameter allowance， hight allowance， weight allowance and size of defects of domestic ceramic ware
日用陶瓷的容积、口径误差、高度误差、重量误差、缺陷尺寸的测定方法
📋 Scope / 适用范围 ai_extracted
This standard specifies the measurement methods, measuring tools, and calculation formulas for the volume, diameter error, height error, weight error, and defect dimensions of daily-use ceramic ware. This method is applicable to daily-use ceramic ware, excluding decorative art ceramic products and large-scale ceramic ware products.
本标准规定了日用陶瓷器的容积、口径误差、高度误差、重量误差、缺陷尺寸的测量方法、测量工具 以及计算公式。 本方法适用于日用陶瓷器，不包括陈设艺术陶瓷制品和大型陶瓷器制品。
📝 Foreword / 前言 ai_extracted
This standard has been revised with reference to the relevant provisions of the "Inspection Standard for Ceramic Ware" of the Japan Ceramic Inspection Association. In addition to editorial revisions made to GB/T 3301-1982 in accordance with GB/T 1.1-1993 "Directives for the Work of Standardization - Unit 1: Rules for the Drafting and Expression of Standards - Part 1: Basic Provisions for the Compilation of Standards," the main revisions are as follows: — Chapter 1, Subject Content and Scope of Application, has been added. — The measuring tools in Chapter 3 have been supplemented. — The determination of volume in Chapter 4 has been supplemented. — The description of measurement methods for rim diameter allowance in Chapter 5, height allowance in Chapter 6, and weight allowance in Chapter 7 has been added. — The calculation formulas for rim diameter allowance in Chapter 5, height allowance in Chapter 6, and weight allowance in Chapter 7 have been supplemented. This standard replaces GB/T 3301-1982 from the date of implementation. This standard was proposed by the State Bureau of Light Industry. This standard is under the technical jurisdiction of the National Ceramic Standardization Center. This standard was drafted by the Ceramic Research Institute of the China National Light Industry Council. The main drafters of this standard: Cheng Guo'an, Wang Xiaoping. National Standard of the People's Republic of China Standard Method for Measurement of Volume, Rim Diameter Allowance, Height Allowance, Weight Allowance, and Size of Defects of Domestic Ceramic Ware GB/T 3301-1999 Replaces GB/T 3301-1982
本标准是参照日本陶瓷检验协会标准《陶瓷器的检验标准》有关规定进行修订的。 本标准除按GB/T 1. 1-1993《标准化工作导则 第1单元：标准的起草与表述规则 第1部分：标 准编写的基本规定》对GB/T 3301-1982进行编辑性修订外，主要修订内容如下： — 增加了第1章主题内容和适用范围。 — 对第3章中的测量工具作了补充。 — 对第4章容积的测定作了补充。 — 增加了第5章口径误差，第6章高度误差，第7章重量误差的测量方法叙述。 — 对第5章口径误差，第6章高度误差，第7章重量误差的计算公式作了补充。 本标准从实施之日起，同时代替GB/T 3301-1982, 本标准由国家轻工业局提出。 本标准由全国陶瓷标准化中心技术归口。 本标准由中国轻工总会陶瓷研究所负责起草。 本标准主要起草人：程国安、汪小平。 中华人民共和国国家标准 日用陶瓷的容积、口径误差、高度误差、 ＿＿一⋯，＿．一．．．一 ‘一 GB/T 3301-1999 重里误差、缺陷尺寸的测定方法 一’－一’ Standard method for measurement of vol ume,ri m di amet er 代替GB/T 3301-1982 allowance ,Night allowance, weight allowance and size of defects of domestic ceramic ware
📚 References & Relations / 引用与关联
🔗 Related Standards / 同类标准
Content extracted by AI. Not officially verified.