GB/T 20368
ActiveProduction，storage and handling of liquefied natural gas（LNG）
液化天然气（LNG）生产、储存和装运
📋 Scope / 适用范围 ai_extracted
This specification stipulates the design and construction of liquefied natural gas vehicle refueling stations in Shenzhen. This specification is applicable to the design, construction, and acceptance of the following new, expanded, and renovated vehicle refueling station projects, where the LNG storage capacity does not exceed 180 m³, the LNG working pressure is not greater than 1.6 MPa, and the L-CNG working pressure is not greater than 25.0 MPa: 1) Liquefied natural gas (LNG) refueling stations (hereinafter referred to as LNG refueling stations); 2) Natural gas refueling stations where LNG is pressurized in liquid state and then vaporized (hereinafter referred to as L-CNG refueling stations); 3) Combined LNG and L-CNG refueling stations (hereinafter referred to as LNG/L-CNG refueling stations); 4) Refueling stations combining an LNG refueling station or an L-CNG refueling station, or both, with a gasoline/diesel refueling station (hereinafter referred to as combined refueling stations).
本规范规定了深圳市液化天然气汽车加气站的设计和施工建造。 本规范适用于LNG储存量不超过180m 3，LNG工作压力不大于1.6MPa，L-CNG工作压力不大于25.0 MPa 下列新建、扩建和改建的汽车加气站工程的设计、施工及验收： 1）液化天然气（LNG）加气站（以下简称LNG 加气站）； 2）液化天然气经液态加压、气化的天然气加气站（以下简称L-CNG 加气站）； 3）LNG 和L-CNG 联建合用的加气站（以下简称LNG/L-CNG 加气站）； 4）LNG 加气站或L-CNG 加气站或两者联合与加油站合建（以下简称加油加气站）。
📝 Foreword / 前言 ai_extracted
To standardize the promotion and application of liquefied natural gas (LNG) vehicle refueling stations and LNG/L-CNG refueling stations in Shenzhen, and to unify technical requirements, ensuring safety, reliability, advanced technology, and economic feasibility, this specification is hereby formulated. This specification is primarily developed with reference to standards such as GB/T 20368 "Standard for Production, Storage, and Handling of Liquefied Natural Gas (LNG)" and GB 50156 "Code for Design and Construction of Automobile Refueling and Gas Filling Stations". This specification is proposed by the Shenzhen Housing and Construction Bureau. This specification is under the jurisdiction of the Shenzhen Housing and Construction Bureau. This specification was drafted by: Shenzhen Housing and Construction Bureau, North China Municipal Engineering Design & Research Institute. Main drafters of this specification: Deng Yuan, Wu Hongsong, Du Jianmei, Jiao Wei, Xu Zhanwei, Fan Xuejun, Liu Dawei, Lyu Fengqin, Wang Lijun, Wu Zhirong, Wang Guangzhu, Huang Chengke. SZJG 40—2011
为了规范深圳市液化天然气（LNG）汽车加气站、LNG/L-CNG 加气站的推广应用，统一技术要求， 做到安全可靠、技术先进、经济合理，特制订本规范。 本标准主要参照GB/T 20368《液化天然气（LNG）生产、储存和装运标准》、GB50156《汽车加油 加气站设计与施工规范》等标准编制。 本规范由深圳市住房和建设局提出。 本规范由深圳市住房和建设局归口。 本规范起草单位：深圳市住房和建设局、中国市政工程华北设计研究总院。 本标准主要起草人：邓渊、吴洪松、杜建梅、焦伟、徐占伟、范学军、刘大伟、吕凤芹、王立军、 吴志荣、王广柱、黄承珂 SZJG 40—2011
📚 References & Relations / 引用与关联
🔗 Related Standards / 同类标准
Content extracted by AI. Not officially verified.