GB/T 17554.1-2006

📋 Scope / 适用范围 ai_extracted

I'm sorry, but the input you provided appears to be a series of punctuation marks and ellipses without any recognizable Chinese national standard content to translate. Please provide the actual Chinese text you would like me to translate into English.

📝 Foreword / 前言 ai_extracted

GB/T 17554 "Identification cards — Test methods" is planned to be divided into seven parts: — Part 1: General characteristics tests — Part 2: Magnetic stripe cards — Part 3: Integrated circuit cards with contacts and related interface devices — Part 4: Contactless integrated circuit cards — Part 5: Optical memory cards — Part 6: Proximity cards — Part 7: Vicinity cards This part is Part 1 of GB/T 17554, modified adoption of the international standard ISO/IEC 10373-1:1998 "Identification cards — Test methods — Part 1: General characteristics tests" (English version). Compared with ISO/IEC 10373-1:1998, this part contains the following minor technical differences: — In accordance with the new version of the physical characteristics standard for identification cards, this part adds 5.16 "Test method for heat resistance". Compared with GB/T 17554-1998, the main changes in this part are as follows: a) Added 5.16 "Test method for heat resistance"; b) Deleted Clause 6 "Integrated circuit cards with contacts". This part is proposed by the Ministry of Information Industry of the People's Republic of China. This part is under the jurisdiction of the China Electronics Standardization Institute. Drafting organization of this part: China Electronics Standardization Institute. Main drafters of this part: Feng Jing, Cai Huaizhong, Geng Li, Jin Qian. This part replaces GB/T 17554-1998 "Identification cards — Test methods" from the date of implementation. GB/T 17554.1-2006 Identification cards — Test methods Part 1: General characteristics tests Scope This standard specifies test methods for the characteristics of identification cards as defined in GB/T 14916-2006. Each test method cross-references one or more base standards, which may be GB/T 14916 or one or more supplementary standards defining information storage technologies applied in identification card applications. Note 1: Acceptance criteria are not included in this part but are provided in the national standards mentioned above. Note 2: Several test methods described in this part are intended to be performed independently. The specified card is not required to pass all tests sequentially. This part defines test methods common to one or more card technologies. Other parts of GB/T 17554 define test methods for specific technologies. 2 Normative references The following documents contain provisions which, through reference in this part of GB/T 17554, constitute provisions of this part. For dated references, subsequent amendments (excluding corrigenda) or revisions do not apply to this part; however, parties to agreements based on this part are encouraged to investigate the possibility of applying the latest versions of these documents. For undated references, the latest version applies to this part. GB/T 131-1993 Mechanical drawings — Surface roughness symbols, codes and their indication (eqv ISO 1302:1992) GB/T 1690-1992 Rubber, vulcanized — Test method for resistance to liquids (neq ISO 1817:1985) GB/T 3922-1995 Textiles — Test method for colour fastness to perspiration (eqv ISO 105/E04:1994) GB/T 11500-1989 Photography — Geometric conditions for measuring transmission density (neq ISO 5-2:1985) GB/T 14916-2006 Identification cards — Physical characteristics (ISO/IEC 7810:2003, IDT) GB/T 17552-1998 Identification cards — Financial transaction cards (idt ISO/IEC 7813:1995) GB/T 16649.1-2006 Identification cards — Integrated circuit cards with contacts — Part 1: Physical characteristics (ISO/IEC 7816-1:1998, MOD) GB/T 10125-1997 Corrosion tests in artificial atmospheres — Salt spray tests (eqv ISO 9227:1990) GB/T 17553.1-1998 Identification cards — Contactless integrated circuit cards — Part 1: Physical characteristics (idt ISO/IEC 10536-1:1992) GB/T 17550.3-1998 Identification cards — Optical memory cards — Linear recording method — Part 3: Optical properties and characteristics (idt ISO/IEC 11694-3:1995) ISO/IEC 7811-1:1995 Identification cards — Recording technique — Part 1: Embossing ISO/IEC 7811-2:1995 Identification cards — Recording technique — Part 2: Magnetic stripe ISO/IEC 7811-6:1996 Identification cards — Recording technique — Part 6: High coercivity magnetic stripe 3 Terms and definitions The following terms and definitions apply to this part: Test method Method for testing the characteristics of an

📚 References & Relations / 引用与关联

🔗 Related Standards / 同类标准