GB/T 16825.1-2008
AbolishedVerification of static uniaxial testing machines - Part 1：Tension/compression testing machines - Verification and calibration of the force-measuring system
静力单轴试验机的检验 第1部分: 拉力和(或)压力试验机测力系统的检验与校准
📚 References & Relations / 引用与关联
normative_reference
GB/T 13634
normative_reference
GB/T 13634-2000
normative_reference
GB/T 16825
normative_reference
ISO 376
📖 Terms & Definitions / 术语和定义 ai_extracted
- 校准
- calibrati on 在规定的条件下，为确定测量仪器或测量系统所指示的量值，或实物量具或参考物质所代表的量 值，与对应的由标准所复现的量值之间关系的一组操作。 注1:校准结果既可给出被测量的示值，又可确定示值的修正值。 注2:校准也可确定其他计量特性，如影响量的作用。 注3:校准结果可以记录在校准证书或校准报告中 CJJF 1001-1998中8. 11口[‘〕
🔗 Related Standards / 同类标准
GB/Z 38434-2019
Metallic materials—Guide to test pieces preparation for mechanical testing
GB/Z 40387-2021
Metallic materials—Principles and designs for multiaxial fatigue testing
GB/T 1814-1979
Inspection method for steel work fractures
GB/T 3771-1983
Conversion of hardness and strength for copper alloys
GB/T 4197-1984
Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys
GB/T 4196-1984
Method for testing the density of tungsten and molybdenum bars
GB/T 4195-1984
Method for measuring the distribution of the powder size of tungsten and molybdenum method by the balance for the fall of the particles
GB/T 4194-1984
Creep testing，high temperature treatment and metallographic examination of the tungsten wires
Content extracted by AI. Not officially verified.