GB/T 13306-2011
ActivePlates
标牌
📋 Scope / 适用范围 ai_extracted
This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of mine underground detection robots. This standard is applicable to mine underground detection robots (hereinafter referred to as robots).
本标准规定了矿用井下探测机器人的技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于矿用井下探测机器人(以下简称机器人)。
📝 Foreword / 前言 ai_extracted
This standard was drafted in accordance with the rules given in GB/T 1.1—2009. This standard was proposed by Tangshan Municipal Bureau of Quality and Technical Supervision. This standard was drafted by: Tangshan Kaicheng Electric Control Equipment Group Co., Ltd. Main drafters of this standard: Zhang Shusheng, Lu Wentao, Yang Chunming, Tan Shuping. DB13/T 1483—2011
本标准按照GB/T 1.1—2009给出的规则起草。 本标准由唐山市质量技术监督局提出。 本标准起草单位:唐山开诚电控设备集团有限公司。 本标准主要起草人:张树生、陆文涛、杨春明、谭树萍。 DB13/T 1483—2011
📚 References & Relations / 引用与关联
📖 Terms & Definitions / 术语和定义 ai_extracted
- 矿用井下探测机器人 robot used under mine / mine-used underground detection robot
- 能在煤矿井下进行环境探测并具有数据实时传输功能的移动机器人。
- A mobile robot capable of conducting environmental detection in coal mine underground environments and possessing real-time data transmission functionality.
- 续航能力 maximum displacement distance / maximum displacement distance
- 机器人在水平路面条件下能够连续运行的最大距离,是针对内置动力源形式的机器人,为一次 补充能源后的最大可移动距离。
- The maximum distance a robot can continuously travel under horizontal road conditions refers to the maximum movable distance of a robot with a built-in power source after a single energy replenishment.
- 单级台阶 single step / single step
- DB13/T 1483—2011 2 路面水平高度差的最大值。
- DB13/T 1483—2011 2 Maximum value of pavement horizontal height difference.
- 多级台阶 continuous steps / continuous steps
- 连续多个路面水平高差与宽度的组合。
- Combinations of multiple consecutive pavement level differences and widths.
- 涉水能力 ability of wading through water / ability of wading through water
- 在短时间内穿越积水区,积水不会进入机器人内部而损坏机器人。
- When traversing a waterlogged area in a short period of time, water will not enter the interior of the robot and cause damage.
🔗 Related Standards / 同类标准
Content extracted by AI. Not officially verified.