GB/T 12177
ActiveIndustrial automation systems - Numerical control of machines - NC processor output - File structure and language format
工业自动化系统 机床数值控制 NC处理器输出 文件结构和语言格式
📋 Scope / 适用范围 ai_extracted
本部分规定了湿冷发电机组凝结水精处理的基本方法和技术要求。 本部分适用于由直流锅炉和亚临界参数汽包锅炉供汽的汽轮机组的凝结水精处理。
💡 Application / 应用场景 AI generated
This standard specifies the file structure and language format for NC (Numerical Control) processor output in industrial automation systems for machine tools. It defines the data organization and syntax used to transfer numerical control programs between different systems. The standard ensures interoperability and consistent interpretation of NC output files across various manufacturing equipment and software platforms.
📚 References & Relations / 引用与关联
normative_reference
DL/T50
normative_reference
DL/T519-20
normative_reference
DL/T912
normative_reference
GB/T111
normative_reference
GB/T121
normative_reference
GB/T12598
📖 Terms & Definitions / 术语和定义 ai_extracted
- 前置氢离子交换 cation exchaⅡg。r preⅡlter
- 在对凝结水进行除盐处理前,采用氢离子交换器去除凝结水中的悬浮物、腐蚀产物和铵离子的过程。
- 前置除铁过滤 iron~removaI preⅡlter
- 在凝结水进行除盐处理前,采用过滤的方法去除凝结水中铁腐蚀产物和悬浮物的过程。
- 单床串联系统 separate bed system
- 将阳树脂、阴树脂分别装填在不同的离子交换器中,采用阳床— 阴床或阳床一阴床— 阳床串联组合 的凝结水精处理系统。 3,5 混合床 mixed bed 将按照一定的比例并充分混合的阴树脂、阳树脂装填在同一台离子交换器中,用于对凝结水进行除 盐处理的设各,简称“混床”。
- 氢型混床 hydrogenˉ印pe mixed bed
- 离子交换器内装填的阳树脂为氢型、阴树脂为氢氧型时的混床称为“氢型混床”。 1 DL/T3331-— 2010 3,7 铵型混床 ammo“um-印pe mixed bed 氢型混床经过初期的氢型运行、中期转型阶段的运行,混床内的氢型阳树脂按水中铵离子比例转换 为铵型树脂,这种以铵型阳树脂和氢氧型阴树脂混合继续运行的混床称为“铵型混床”。 3,8 裸混床工艺 naked mixed bed 混床前不设置任何前置处理设备(包括前置氢离子交换器和前置除铁过滤器)的凝结水精处理系统 称为裸混床工艺。 3,9 溢出一填充效应 overnow c,r ⅡlIiⅡg effect 如果树脂的实际再生度高于平衡值(平衡值是指在一定的水的pH值和要求的出水水质条件下,与 树脂相平衡时的再生度),则能够吸收水中的Na+或Clˉ,称为填充效应;如果树脂的实际再生度低于平 衡值,则树脂相中的Na+或Cr将被排代,进入水中,称为溢出效应。 310 再生度 regeⅡeration degree 对阳树脂来说,是指经酸再生后氢型树脂占阳树脂体积交换容量的百分比;对阴树脂来说,是指经 碱再生后氢氧型树脂占阴树脂
🔗 Related Standards / 同类标准
GB/Z 18728-2002
ERP system function structure for manufacture techno-logy specification
GB/Z 18727-2002
Enterprise application PDM implementing specification
GB/Z 20177.1-2006
Control network LONWORKS technology specification Part1:Protocol specification
GB/Z 21193.1-2007
Fossil-fired steam power stations - Part 1: Limiting controls
GB/Z 16656.1004-2010
Industrial automation systems and integration - Product data representation and exchange - Part 1004: Application module: Elemental geometric shape
GB/Z 16656.1003-2010
Industrial automation systems and integration - Product data representation and exchange - Part 1003: Application module: Curve appearance
GB/Z 16656.1002-2010
Industrial automation systems and integration - Product data representation and exchange - Part 1002: Application module: Colour
GB/Z 16656.1007-2010
Industrial automation systems and integration - Product data representation and exchange - Part 1007: Application module: General surface appearance
Content extracted by AI. Not officially verified.